Solar Mount Design Request

Complimentary pole mount designs and site-specific foundation recommendations for your project.

MT Solar Pole Mounts are made to order based on the installation site and module sizes used. Please provide us with the module sizes you plan to use and site requirements. We will determine the right mount for your project and send a quote. Fill out the form below to get our team started, thank you!

Take Me To The AutoDesigner

"*" indicates required fields

Step 1 of 2

Contact Information

Primary Contact Name*

First Last

Email*

Phone*

Company Name

Billing Address

Street Address City State / Province / Region ZIP / Postal Code

Project Details

Please provide the module size, installation address.

Project Name*

Project Type*

New or Existing Project

To avoid duplicates, please let us know if this is an existing project so we can update the information.

Project Name or W-####

Please help us identify the existing project to reduce delays and confusion. Please provide a W-#### if possible.

Installation Address for Mount*

Street address, city and zip code or city, state, zip. We will use this information to look up the wind and snow loads for your site. We may need you to contact your local building official to determine these load variables.

Wind Exposure Category*

Most projects can use Exposure B due to buildings or trees somewhere around the array. Exposure category is based upon ground surface roughness, which is determined from the topography, vegetation, and existing structures. ASCE 7-16 defines three exposure categories.

Array Layout

Our mounts are made to order for the modules used and site conditions. You will need to know which modules (panels) you are using for the project.

PV Module Width (inches)*

The short dimension of the solar module.

Number of Modules / Array Configuration*

PV Module Length (inches)*

The long dimension of the solar module.

Preferred Winter Tilt Angle*

All arrays are adjustable from 5º to 90º. For engineering and drawing, we reference a single tilt.

Desired Front Edge Ground Clearance*

The distance from the leading edge of array to the ground. We recommend a minimum of 5ft. Due to our hoist system, higher ground clearance does not affect installation time.

Qty of Mounts

for instance, 3 mounts with 12 modules on each mount.

Complimentary Foundation Recommendation

We will provide a complimentary foundation recommendation with the calculation package. Standard is 48" x 48" square or a 36" round foundation. All foundation recommendations will be designed using a soil class: 4 or sand. Forming or sonotube are not recommended due to compaction concerns on the sides of the hole. It is recommended that the foundation be poured directly to native soil on all sides. If the project requires something outside of those two options you will need to work with an engineer in your area to get that designed.

Additional Project Details

Include anything else you think we should know. Do you plan to use the mount for parking, agrivoltaics, patio cover, etc. Enter any site concerns as it may help.

Please upload any supporting files or documents.

Drop files here or

Max. file size: 50 MB.

Design and Estimate Assistance

Complimentary pole mount designs and site-specific foundation recommendations for your project.

Contact Information

Project Details

Array Layout